http://www.wado.com.tw Thu, 1 Jan 1970 08:00:00 +0800 3600 http://www.wado.com.tw/03.html Mon, 14 Jun 2010 13:44:25 +0800 03 http://www.wado.com.tw/06-wb363.html Equipped with DC motor transmission device via micro controller for balance of armature by manual.(2010/Jun/14 13:44:43)]]> Mon, 14 Jun 2010 13:44:43 +0800 06-wb363 http://www.wado.com.tw/09-wf120.html This machine is a device used to execute spot welding and fusing for the Wire of Commutator hook in the Armature.
This is fully automatic load the armature into the conveyor to working area.
Machine starts to loading → fixed position → double head fusing → index → completion.
Equipped with robot, conveyor, cooling system and programmable current controller via PLC controller for simultaneous two head fusing slot and hook type commutator.

(2010/Jun/14 13:45:09)]]> Mon, 14 Jun 2010 13:45:09 +0800 09-wf120 http://www.wado.com.tw/commutator-fusing-machine.html This machine is a device used to welding / fusing the copper wire which is hooked in the bar of commutator.
Operator put the armature on the tooling, push into the chuck in standing.
After push start button, the chuck will clip the shaft tightly.
Automatic rotating → fusing → completion → operator take out the armature.

(2010/Jun/14 13:45:23)]]> Mon, 14 Jun 2010 13:45:23 +0800 commutator-fusing-machine http://www.wado.com.tw/07-wt180.html This machine is an automatic device used cutter to turning commutator dia.
The armature put on the V-block by operator.
The belt device goes downward to oppress the lamination, then start turning. And the machine will automatic cutter forward → turning → cutter backward (cutter back to original position) → completion.

Equipped with induction motor and pneumatic transmission system alone with precise tooling via PLC controller for armature turning.(2010/Jun/14 13:45:43)]]> Mon, 14 Jun 2010 13:45:43 +0800 07-wt180 http://www.wado.com.tw/automatic-commutator-turning-machine.html The armature put on the V-block by operator.
The belt device goes downward to oppress the lamination, then start turning. And the machine will automatic cutter forward → turning → cutter backward (cutter back to original position) → completion.
(2010/Jun/14 13:51:32)]]> Mon, 14 Jun 2010 13:51:32 +0800 automatic-commutator-turning-machine http://www.wado.com.tw/Product-20081226163231.html The armature put on the V-block by operator.
The belt device goes downward to oppress the lamination, then start turning. And the machine will automatic cutter forward → turning → cutter backward (cutter back to original postion) → completion.(2010/Jun/14 13:49:18)]]> Mon, 14 Jun 2010 13:49:18 +0800 Product-20081226163231 http://www.wado.com.tw/05-wta380.html Operator put armature into tooling→push the start button→armature will be test through probe→ completion.
Equipped with adjustable tooling via PLC controller for the process of test, being accordingly surge test→ dielectric test→insulating test→DC resistance test.(2010/Jun/14 13:55:14)]]> Mon, 14 Jun 2010 13:55:14 +0800 05-wta380 http://www.wado.com.tw/automatic-armature-testing-machine.html This machine is device to testing armature.
Operator put armature into tooling → push the start button → armature will be test through probe → completion

(2010/Jun/14 13:56:52)]]> Mon, 14 Jun 2010 13:56:52 +0800 automatic-armature-testing-machine http://www.wado.com.tw/fully-automatic-armature-testing-machine.html This is automatically test and judgment machine for motor armature. This is fully automatic load the armature into the conveyor to working area.
Machine automatically starts loading → put armature in tooling → testing through probe (contact with commutator) → completion

(2010/Jun/14 13:58:26)]]> Mon, 14 Jun 2010 13:58:26 +0800 fully-automatic-armature-testing-machine http://www.wado.com.tw/fully-auto-commutator-turning-machine.html This machine is an automatic turning commutator by cutter.
This is fully automatic load the armature into the conveyor to working area.
Machine starts to loading → armature is put on V block → the belt goes down to the press the lamination and turning → automatic cutter forward → turning → cutter backward(cutter seat back zero position) → completion.

(2010/Jun/14 13:59:52)]]> Mon, 14 Jun 2010 13:59:52 +0800 fully-auto-commutator-turning-machine http://www.wado.com.tw/fully-auto-end-fiber-placing-machine.html This machine is an automatic device used to plug the End Insulator into the Lamination.
This is fully automatic load the armature onto conveyor to working area.
Machine starts to loading → fixed position → front end firber placing → armature turn → position → back end fiber placing → completion.

(2010/Jun/14 14:00:48)]]> Mon, 14 Jun 2010 14:00:48 +0800 fully-auto-end-fiber-placing-machine http://www.wado.com.tw/fully-auto-commutator-placing-machine.html This machine is an automatic device used to inserting commutator into the shaft.
This is fully automatic load the armature into the conveyor to working area.
Machine starts to loading → fixed position → commutator placing → completion.

(2010/Jun/14 14:01:32)]]> Mon, 14 Jun 2010 14:01:32 +0800 fully-auto-commutator-placing-machine http://www.wado.com.tw/fully-automatic-shaft-placing-machine.html Shaft into the Lamination.
This is fully automatic load the lamination and shaft from the material through into tooling. Via conveyor to working area.
Machine starts to loading → postion → commutator placing → completion.
Easy to operation with touching screen and diagnostic system.(2010/Jun/14 14:02:25)]]> Mon, 14 Jun 2010 14:02:25 +0800 fully-automatic-shaft-placing-machine http://www.wado.com.tw/automatic-wedge-insertion-machine.html Automatic Wedge Insertion Machine

The armature is put in fixture by operator, and push start button.
When armature is in right position → auto cutting → index → inserting paper → completion

(2010/Jun/14 16:05:14)]]> Mon, 14 Jun 2010 16:05:14 +0800 automatic-wedge-insertion-machine http://www.wado.com.tw/wr60.html Automatic Armature Insulating Paper Inserting Machine

The armature is put in fixture by operator, and push start button.
When armature is in right position → auto cutting → index → inserting paper → completion

(2010/Jun/14 14:09:50)]]> Mon, 14 Jun 2010 14:09:50 +0800 wr60 http://www.wado.com.tw/coil-winding-machine.html This equipment is automatic coil winding machine in which simultaneously winding 24 coils at one time.
Copper wire will be putted in tooling by operator → control by induction motor → winding → completion

(2010/Jun/14 14:12:17)]]> Mon, 14 Jun 2010 14:12:17 +0800 coil-winding-machine http://www.wado.com.tw/ws286g.html Automatic Multi-Poles Stator Winding Machine
This machine is device for automatic winding multi pole of stator.
Operator put stator on tooling → control by servo motor → rotating → arraying → winding → automatic cutting → completion.

Equipped with the servo motor and electric powder break via CNC controller with interface monitor for complete winding of outer stator.

(2010/Jun/14 14:18:34)]]> Mon, 14 Jun 2010 14:18:34 +0800 ws286g http://www.wado.com.tw/ws420.html Automatic Double Spindle Stator Winding Machine
This machine is automatic inner winding 2 pole stator. Operator put stator on tooling → control by induction motor → winding → completion.

Equipped with induction motor and multi-angle transmission device with auto-lubrication via PLC controller for complete winding of two poles internal stator.

(2010/Jun/14 14:22:50)]]> Mon, 14 Jun 2010 14:22:50 +0800 ws420 http://www.wado.com.tw/4-6-8-pole-stator-winding-machine.html This machine is automatic inner winding 4, 6, 8 pole stator.
Operator put stator on tooling → control by servo motor → winding → completion.

(2010/Jun/14 16:06:30)]]> Mon, 14 Jun 2010 16:06:30 +0800 4-6-8-pole-stator-winding-machine http://www.wado.com.tw/Product-20091991820.html
This machine is automatic winding 4 pole stator.
Operator put stator on tooling → control by servo motor → rotating →  winding → completion.(2010/Jun/14 14:31:39)]]> Mon, 14 Jun 2010 14:31:39 +0800 Product-20091991820 http://www.wado.com.tw/wa150.html The armature is put into index of fixture in center by the operator.
Then, pull the copper wire to cutter fixture from double flyer. After, push the start button. The copper wire is fixed in cutter fixture.
Machine starts automatic position -> hooking wire -> winding by double flyer -> rotating -> completion.
The completive armature is put in cutter fixture, another armature is put in it again.

Feature

1. High efficiency, stably and suitable for mass production.
2. Easy operation with colorful touch panel.
3. Self-monitoring system and abnormal display.
4. 100 parameter memories setting for various of armature. Password is setting for change of different armature, to prevent anyone to change the setting.
5. Special winding and hooking way can be set. If the number of the slot is different, hooking way of commutator can be changed.

(2010/Jun/14 12:30:50)]]> Mon, 14 Jun 2010 12:30:50 +0800 wa150 http://www.wado.com.tw/wa151.html The armature is put into index of fixture in center by the operator.
Then, pull the copper wire to cutter fixture from double flyer. After, push the start button. The copper wire is fixed in cutter fixture.
Machine starts automatic position -> hooking wire -> winding by double flyer -> rotating -> completion.
The completive armature is put in cutter fixture, another armature is put in it again.

Feature

1. High efficiency, stably and suitable for mass production.
2. Easy operation with colorful touch panel.
3. Self-monitoring system and abnormal display.
4. 100 parameter memories setting for various of armature. Password is setting for change of different armature, to prevent anyone to change the setting.
5. Special winding and hooking way can be set. If the number of the slot is different, hooking way of commutator can be changed.

(2010/Jun/14 12:32:12)]]> Mon, 14 Jun 2010 12:32:12 +0800 wa151 http://www.wado.com.tw/wa154.html The armature is put into index of fixture in center by the operator.
After, push the start switch.
Machine starts automatic position -> hooking wire -> winding by double flyer -> rotating -> completion.

Feature

1. High efficiency, stably and suitable for mass production.
2. Easy operation with colorful touch panel.
3. Self-monitoring system and abnormal display.
4. Auto clamp and cut wire.

(2010/Jun/14 13:32:18)]]> Mon, 14 Jun 2010 13:32:18 +0800 wa154 http://www.wado.com.tw/wa155a.html Thsi is fully automatic load the armature into the conveyor to working area.
Machine starts to loading -> fixed position -> double flyer winding -> index -> completion.

Feature

1. High efficiency, stably, QCT and suitable for mass production.
2. Easy operation with colorful touch panel. 100sets of model memories.
3. Self-monitoring system and abnormal display.
4. Auto optical fiber sensor for checking and high accuracy.
5. Five set of tendion controoler and it also can adjust and setting alone.

(2010/Jun/14 12:33:46)]]> Mon, 14 Jun 2010 12:33:46 +0800