WADO Electrical engineering Co., LTD.

Product ID: WA-150, WA-151, WA-152, WA-154,WA-155A Automatic Double Flyer Armature Winding Machine, Fully Automatic Double Flyer Armature Winding Machine WA-151 & WA-150 take armature into the fixed chuck, then, pull the wire from two flyers simultaneously to the cutter fixed seat. And push start button. The wire fixed by the cutter fixed seat and start to - fixing - hooking - winding - rotating until completion. Operator take the armature to put on the cutter fixed seat and put another armature into the chuck than push START button. (1).CNC controller (2 sets of 1KW servo motor for winding axis, 1 set 400W for index axis. (2).Touching screen and diagnostic system. (3).Electric power brake 1 set. Wire dia. A.(0.12-0.3mm) or B.(0.3-1.0mm) (4).Equipped with CNC controller servo system. It is stably, accuracy, durable. (5).High effective and fast change tooling for mass production. (6).Chinese / English operation system can be exchange. (7).100 memory setting for different armature type. (8).Suitable for special winding pattern and hooking. (9).Touch screen for changing function and setting. (10).I/O test can be done from Touch screen. It is convenience for daily check. (11).Electric powder brake is separated with 5 range of tension for different winding and hooking, including memories function. (12).Display the output. (13).The safety cover will close automatically when winding.It protects operator safety. (14).No automatic cutting. WA-152 Equipped with the servo motor, auto-cutter and electric powder break via CNC controller with interface monitor for complete winding of armature of hook type commutator. WA-154 is control by PLC through the Servo motor rotating, fix position, hooking and winding. It is fully automatic cutting and suit for general armature-hooked commutator. The operator just put the armature on to the fix chuck, then upsh START button, Machine works fully automatic until completion No need to cut the wire by operator. Machine equipped with auto adjustable cutter, clip wire function. (1).CNC controller (2 sets of 1 KW servo motor for winding axis, 1 set 400W for index axis. (2).Touching screen and diagnostic system. (3).Fully automatic adjustable cutting, clip wire robot device. (4).Electric power brake 1 set. Wire dia. A. (0.12-0.3mm) or B. (0.3-0.1mm) (5).Fast change tooling, chuck. (No tool required) WA-155A Prepare material rack and store material rack. It can be stand-alone machine. Operator can control several machines at the same time.

Winding Machine Click here for details.

Specification (WA-152) WA-150 WA-151 WA-152 WA-154 WA-155A Wire Diameter A 0.12~0.3mm, B 0.3~1.0mm A 0.12~0.3mm, B 0.3~1.0mm A 0.12~0.3mm, B 0.3~1.0mm 0.12~0.3mm, 0.3~1.0mm 0.12~0.3mm, 0.3~1.0mm Armature Diameter 20~60mm 20~90mm 20~90mm 20~90mm 20~90mm Armature Stack Height 20~60mm 20~90mm 20~90mm 20~90mm 20~90mm Commutator Diameter 15~40mm 15~40mm 15~40mm 15~40mm 15~40mm Numbers of Slots 6~36 Slots 6~36 Slots 6~36 Slots 6~36 Slots 6~36 Slots Motor speed 3000 R.P.M. 3000 R.P.M. 3000 R.P.M. 3000 R.P.M. 3000 R.P.M. Controller CNC Control system CNC Control system PLC Control system PLC Control system PLC Control system Motor AC servo motor (3sets) AC servo motor (3sets) AC servo motor (3sets) AC servo motor (3sets) AC servo motor (3sets) Air pressure 4~6kg/cm2 4~6kg/cm2 4~6kg/cm2 4~6kg/cm2 4~6kg/cm2 Power supply AC 3Ø 220V/380V ± 10% 50/60HZ AC 3Ø 220V/380V ± 10% 50/60HZ AC 3Ø 220V/380V ± 10% 50/60HZ AC 3Ø 220V/380V ± 10% 50/60HZ AC 3Ø 220V/380V ± 10% 50/60HZ Dimension 890L x 1140W x 1350H 840L x 1200W x 1550H 900L x 1100W x 1500H 900L x 1100W x 1500H 1800L x 1200W x 1700H Weight 500 Kgs 750 Kgs 750 Kgs 750 Kgs 850 Kgs Hooking way - - - a, U a, U Direction - - - CW or CCW CW or CCW Numbers of turns - - - 0~9999 0~9999 Commutator type - - - Hook Hook or Bar

Ordering information: Minimum Order: Negotiable TEL: 886-2-2299-6942 FAX: 886-2-2299-6943